XJR (X300) L6-4.0L SC (AJ16) (1995)
Intake Air Duct: Service and Repair
Upper Air Intake Duct
UPPER AIR INTAKE DUCT RENEW
-
Slacken the clamp securing the upper air intake duct hose to the air flow meter.
-
Remove the bolts securing the upper air intake duct (4 Fig. 1) to the intercooler (8 Fig. 1) and remove the intake duct / hose assembly.
-
Remove the intake duct gasket and clean the intercooler joint face.
-
Remove the retaining plate bolts securing the hose to the intake duct and remove the hose assembly.
Refit in the reverse order of the removal procedure.