XJR (X300) L6-4.0L SC (AJ16) (1995)
Air Bag Harness: All Technical Service Bulletins
Airbag Frame/Harness - Squeaks & Rattles
19.5-03
DATE
6/96
Sedan Range
MODEL
1995 MY
Sedan Range
VIN
720001-741673
SERVICE TECHNICAL BULLETIN
Squeaks & Rattles - Noise from Harness & Airbag Frame - Repair Procedure
ISSUE:
Some 1995 MY Sedan Range vehicles within the above VIN range may experience noise caused by the vehicle harness rubbing against both the body
processor module and the passenger airbag module.
ACTION:
After verifying a customer complaint of squeaking from the dashboard, proceed as follows:
REPAIRING HARNESS & AIRBAG FRAME SQUEAKS
1.
Disconnect the vehicle battery.
2.
Remove the underscuttle panel or glove box.
3.
Disconnect the airbag harness, remove the bolts and nut (illustration 1) and remove the deployment door. Place the door on a soft surface to ensure
the veneer will not be damaged.
4.
Remove the passenger airbag module.
5.
Remove the passenger footwell duct.