XJR (X300) L6-4.0L SC (AJ16) (1995)
^
The camber adjustment shims are installed between the side member and the V-mount (Illustration 2).
NOTE:
When shims are installed, the existing bolts, must be replaced by longer bolts, part no. JZB 100057, along with 2 washers, part no. C 21069 between
the head of each bolt and the upper surface of the side member.
^
Road test the vehicle.
^
In cases where installing the maximum of 3 shims does not solve the customer complaint, it is possible to bias the self-centering effect of the caster
angle.