XJR (X300) L6-4.0L SC (AJ16) (1995)
![background image](/jaguar/xjr_(x300)/l6-4.0l_sc_(aj16)/Page-1550001.png)
Suspension Spring ( Coil / Leaf ): Service and Repair
Coil Spring, Front
Road Spring/Pan, Remove & Refit
^
Jack up vehicle securely on two stands.
^
Ensure vehicle is high enough to access service tool JD 115.
^
Remove wheel / tire assembly.
^
Fit lower adaptors to service tool JD 115 and fit this to the front spring (Fig. 1).
^
Engage dowels in slots of suspension turret tops.
^
Tighten tool to tension spring until the load is taken off the spring pan.
^
Undo and remove spring pan securing bolt, slacken off tool wing nut to release tension on the spring.
^
Remove tool from the suspension assembly.
^
Remove spring plate and road spring from the tool.
^
Refit in reverse order to removal procedures.
WARNING: NEVER RE-USE OLD SPRING PAN BOLTS.