XJR (X300) L6-40L SC (AJ16) (1995) Transmission and Drivetrain Repair
![background image](/jaguar/xjr_(x300)/l6-4.0l_sc_(aj16)/Page-1205001.png)
Fluid Transfer Tube: Service and Repair
INTERNAL LUBRICATION PIPE, RENEW
-
Open the hood and fit a suitable fender cover.
-
Raise the vehicle on a ramp.
-
Drain the transmission lubrication system.
-
Remove the fluid pan.
-
Release and remove the internal lubrication pipe retainer to valve body securing bolt.
-
Remove the lubrication pipe retainer.
-
Release and remove the lubrication pipe clamp to valve body securing nut.
-
Remove the lubrication pipe clamp.
-
Displace and remove the lubrication pipe from the trans- mission unit.
-
Drain any residual fluid from the lubrication pipe and place the pipe aside.
-
Clean the relevant parts.
-
Fit and fully seat a new lubrication pipe to the transmission unit.
-
Fit the lubrication pipe clamp.
-
Fit and tighten the lubrication pipe clamp to valve body securing bolt.
-
Fit the lubrication pipe retainer.
-
Refit the fluid pan.
-
Lower the vehicle on the ramp.
-
Refill the transmission unit with fluid.
-
Remove the fender cover and close the hood.