XJR (X300) L6-4.0L SC (AJ16) (1995)
Windshield Washer Switch: Description and Operation
Programmed Wash/Wipe Operation
The end of the switch lever must be pressed inwards for the windscreen wash and wipe operation. Wash/wipe continues for as long as the lever is
pressed.
When released, the windscreen wiper stops immediately and the wiper blades sweep for a further three wipes.
On pressing the end of the switch lever inward and then releasing it, the windscreen washers operate for approximately two seconds before stopping,
whilst the wiper blade continues for a further three wipes.
NOTE: If the end of the switch lever is pressed while the washer fluid warning light is illuminated, the windscreen-washers, but not the wiper blade
continues to operate.