XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-1866001.png)
Rear Door Window Motor: Service and Repair
Removal
1. Remove lift motor and regulator assembly from door. See: Front Door/Front Door Window Regulator/Service and Repair
2. Slacken and remove three screws securing motor to regulator.
3. Remove lift motor from regulator.
Installation
1. Position lift motor on regulator and fit and tighten securing screws.
2. Fit lift motor and regulator assembly in door. See: Front Door/Front Door Window Regulator/Service and Repair