XJR (X308) V8-4.0L SC (AJ26) (1998)
Head Rest: Service and Repair
Rear Seat Headrest
Removal
1. Remove rear heel boards.
2. Remove rear seat cushion. See: Seat Cushion/Service and Repair
3. Remove rear seat belt escutcheon.
4. Fully lower headrests.
5. Remove rear seat squab. See: Seat Cushion/Service and Repair
6. Place seat squab inverted on clean work surface and remove headrest retaining clips.
7. Withdraw headrest from seat squab.
Installation
1. Position headrest fully lowered on seat squab.
2. Fit and fully seat headrest retaining clips.
3. Fit rear seat squab assembly.
4. Fit rear seat belt escutcheons.
5. Fit rear seat cushion.
6. Fit rear heel boards.
7. Raise headrests to original positions.