XJR (X308) V8-4.0L SC (AJ26) (1998)
Installation
1. Position cover on cushion.
2. Secure cover right hand panel to center of cushion using six hog rings.
3. Position cover right hand hand panel through cushion seat belt anchor aperture and secure horizontal seam to cushion using four hog rings.
4. Position cover and pass center overlap through cushion.
5. Secure outer side of cover right hand panel to cushion using seven hog rings.
6. Secure cover left hand panel to center of cushion using six hog rings.
7. Position cover left hand panel through cushion seat belt anchor aperture.
8. Secure horizontal seam of cover left hand panel to cushion using four hog rings.
9. Position cover and pass center overlap through cushion.