1998 XJR (X308) V8-40L SC Daimler Front Seat Service and Repair
4. Raise rear of cushion, disconnect heater element harness multiplugs (if fitted), and move cushion forward carefully feeding seat belt buckles past
cushion cut-outs.
5. Remove seat cushion from vehicle.
Installation
1. Holding outer seat belts clear, position cushion in vehicle with rear edge raised.
2. Position buckle assemblies and carefully feed them past cut-outs in cushion.
3. Heated seat only. Connect heater element harness multiplugs.
4. Fit and fully tighten cushion front securing screws.
5. Using new 1/4 turn fasteners, fit and secure heelboard trims.
6. Reposition seatbelts.
7. On vehicles with heated rear seat only, fit ground cable to battery terminal and fit battery cover. See: Starting and Charging/Battery/Service and
Repair
Squab
Removal
1. On vehicles with heated rear seat only, remove battery cover and disconnect ground cable from battery terminal. See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair
2. Remove rear seat cushion. See: Cushion
3. Remove rear head restraints. See: Head Rest/Service and Repair
4. Slacken and remove outer seat belt lower anchor securing bolts.