XJR (X308) V8-4.0L SC (AJ26) (1998)
Yes
GO to [D5]
No
Inspect harness/connectors EM020 and EM041 (relay socket) for corrosion, damage, bent or pushed back pins. Repair as required and test the
system for normal operation.
D5: CHECK RELAY SOCKET GROUND CONTINUITY
Ignition switch to position 0
Measure resistance between relay socket pin 1 and ground EM017.
-
Is the resistance < 0.5 Ohms?
Yes
GO to [D6]
No
Inspect harness/connectors EM020, EM041 (relay socket) and splice EMS11 for corrosion, damage, bent or pushed back pins. Repair as
required and test the system for normal operation.
D6: CHECK RELAY COIL SUPPLY VOLTAGE
NOTE: Renew relay.
Ignition switch to position 11
Measure voltage between relay socket between pin 2 and ground EM017.