XJR (X308) V8-4.0L SC (AJ26) (1998)
C8: CHECK HARNESS (GROUND) CONTINUITY
With EM014 disconnected, measure the resistance between EM014/009 and ground EM016L
-
Is the resistance < 0.5 Ohms?
Yes
Reconnect EM014,EM015,PI031 or (PI032)
GO to [C10]
No
Inspect harness/connector EM014, ground stud and splice EMS037 for corrosion, damage, bent or pushed back pins and repair as required.
Test the system for normal operation.
C9: CHECK MECHANICAL CONDITION
Remove the VVT(s) and ensure that there is no foreign matter blocking the oil passageway
-
OK?
Yes
GO to [C10]
No
Rectify as required
C10: END
Perform appropriate service drive cycle and check for the presence of DTC.
-
Has the fault code cleared?
Yes
STOP
No
Contact Jaguar Service