XJR (X308) V8-4.0L SC (AJ26) (1998)
8. Remove the main seals from the cam cover.
Remove and discard the outer seal.
Remove and discard the two seals from around the spark plug apertures.
9. Clean all relevant parts and mating faces.
Installation
1. Install new seals to the cam cover.
Install the new outer seal.
Install the two new spark plug aperture seals.
2. Install the securing screws to the cam covers.
Install a new sealing ring to each screw assembly.
Install the screws to the cam covers. Each screw is retained by the cam cover gasket.