XJR (X308) V8-4.0L SC (AJ26) (1998)
10. Tighten the bolts to the correct torque figure 11 - 13 Nm, in the sequence indicated.
Tighten the drain plug to 30 - 40 Nm.
11. Install the oil filter and the oil pressure transmitter.
Tighten the pressure switch to 10 - 14 Nm.
12. Install the crankshaft position sensor.
Install the sensor to the flywheel housing and fit the securing bolt.
Tighten to 8 - 12 Nm.
Install the access grommet to the housing.