XJR (X308) V8-4.0L SC (AJ26) (1998)
![background image](/jaguar/xjr_(x308)/v8-4.0l_sc_(aj26)/Page-485005.png)
16. Disconnect the coolant hoses from the throttle body.
Release the clip which secures the coolant return hose and disconnect the hose. Install a blanking plug to the hose to prevent water leakage.
Release the clip, which secures the coolant feed hose and disconnect the hose. Install a blanking plug to the hose to prevent water leakage.
17. Disconnect the multi-plug, located on the bracket under the left side of the throttle body.
18. Remove the throttle body securing bolts.