XJR (X308) V8-4.0L SC (AJ26) (1998)
26. Note the orientation of the sprockets relative to each other (half a tooth out of line).
27. Clean and inspect all relevant components.
Installation
1. Install the chain tensioning tool 303-532 to the exhaust camshaft sprocket, Bank 2.
Reposition the sprocket to the most advantageous position for use of the tool.
Remove the tool.
2. Install the primary timing chain, Bank 2.
Install the primary chain over the crankshaft sprocket and the intake camshaft sprocket. There must be no slack on the drive side of the primary
chain and the sprockets should not be rotated on the camshafts (or the tensioning tool may not fit).
Slide the camshaft sprockets fully rearwards onto the respective camshafts.