Jaguar Workshop Service and Repair Manuals > XJR (X308) V8-4.0L SC (AJ26) (1998) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Chain | Component Information | Service and Repair | Timing Chain (Primary) - Bank 1

Timing Chain (Primary) - Bank 1|Page 2496 > < Timing Chain (Primary) - Bank 1|Page 2494

Page 5

4. Refit the primary timing chain.

Fit the primary chain to position over the crankshaft sprocket and the VVT unit sprocket. There must be no slack on the drive side of the primary
chain.
The VVT unit must not be rotated on the camshaft

5. Fit the primary chain tensioner blade.

Position the tensioner blade to the cylinder block.
Fit the retaining/pivot bolt and tighten it to 12-16 Nm.

6. Refit the primary chain tensioner assembly.

Use a wedge 303-533 (or two if required) between the primary chain tensioner and tensioner blade, to take up the slack in the chain.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2495

Timing Chain (Primary) - Bank 1|Page 2496 > < Timing Chain (Primary) - Bank 1|Page 2494

Jaguar Workshop Service and Repair Manuals

XJR (X308) V8-4.0L SC (AJ26) (1998)

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1 Page 2495

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1 Page 2495

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2495

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Timing Chain (Primary) - Bank 1
Page 2495