XJR (X308) V8-4.0L SC (AJ26) (1998)
17. Install inner bearing assembly.
1. Install bearing spacer.
2. Install bearing shim.
3. Install inner bearing.
18. Determine hub end float.
^
Measure and record end-float as a datum.
^
Calculating from datum, select a shim that will achieve a 0.076 mm end-float.
19. Install new bearing shim.
1. Install selected shim.
2. Install inner bearing.
3. Using special tool 205-234, install inner bearing seal.
20. Place block of wood on hydraulic press-bed and position hub carrier on block.
21. CAUTION:
Do not allow press load to be directed on to hub studs.
Align ABS rotor to hub and operate press to fully seat rotor on hub.