XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-369003.png)
5. Withdraw parking brake cable through equalizer (LH side cable only).
6. Lower four-post lift.
7. Raise rear of vehicle to working height and support on stands.
8. Remove rear wheel.
9. Position special tool 204-195 on hub studs and install securing nuts.
10. Slacken but do not remove hub to axle shaft securing nut.
11. Remove securing nuts and withdraw special tool (204-195) from hub.
12. Remove rear brake disc.
