XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-839004.png)
(1) Fit a new O ring to the by-pass valve assembly. Lubricate the O ring with petroleum jelly.
(2) Fit the by-pass assembly to the induction elbow and fit the two securing bolts.
2. Fit the induction elbow to the supercharger.
(1) Fit two bolts to the induction elbow and fit a new gasket.
(2) Position the induction elbow assembly with the by-pass hoses located on the charge air cooler stub pipes.
(3) Fit and tighten the four bolts securing the induction elbow to the supercharger.