XJR (X308) V8-4.0L SC (AJ26) (1998)
Fuel Tank Pressure Sensor: Service and Repair
Removal
1. Disconnect battery ground cable. Refer to 'Battery, Battery Cable.' See: Starting and Charging/Battery/Battery Cable/Negative
2. WARNING:
BEFORE PROCEEDING, IT IS ESSENTIAL THAT ALL 'SERVICE PRECAUTIONS' ARE READ AND UNDERSTOOD.
Drain the fuel tank using a suitable suction pump/tanker. If the On-board Refueling Vapor Recovery (ORVR) system is fitted, Refer to 'Fuel
Delivery and Air Induction, Fuel Tank,Fuel Tank Drain Procedure For ORVR System.' See: Fuel Delivery and Air Induction/Fuel Tank/Service
and Repair
3. Remove the fuel tank; Refer to 'Fuel Delivery and Air Induction, Fuel Tank.' See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair
4. Remove pressure sensor from evaporative loss flange.
Installation
1. Installation is the reverse of the removal procedure.