XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-975003.png)
2. Fit the EGR valve to the induction elbow and tighten the two bolts.
3. Connect the coolant hoses.
4. Connect the transfer pipe to the EGR valve and tighten the two bolts.
5. Correct the coolant level as required.
6. Reconnect the battery. Refer to 'Battery, Service and Repair, Battery Reconnection Procedure.' See: Starting and Charging/Battery/Service and
Repair
7. Remove the paintwork protection sheets and close the engine cover.