XJR (X308) V8-4.0L SC (AJ26) (1998)
/v8-4.0l_sc_(aj26)/Page-765001.png)
Knock Sensor: Service and Repair
Bank 2
Removal
1. Remove supercharger; Refer to 'Fuel Delivery and Air Induction, Supercharger.' See: Fuel Delivery and Air Induction/Supercharger/Service and
Repair
2. Remove knock sensor from engine.
Detach connector and disconnect.
Remove knock sensor.
Installation
1. Installation is a reversal of the removal procedure.
2. Tighten sensor to 31 - 41 Nm.
