XJR (X308) V8-4.0L SC (AJ26) (1998)
Fuel Level Sensor: Service and Repair
Removal
1. WARNING:
BEFORE PROCEEDING, IT IS ESSENTIAL THAT ALL 'SERVICE PRECAUTIONS' ARE READ AND UNDERSTOOD.
Remove the battery. Refer to 'Battery, Service and Repair.' See: Starting and Charging/Battery/Service and Repair
2. Drain the fuel tank using a suitable suction pump/tanker. If the On-board Refueling Vapor Recovery (ORVR) system is fitted refer to 'Fuel
Delivery and Air Induction, Fuel Tank,Fuel Tank Drain Procedure For ORVR System.' See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Tank/Service and Repair
3. Remove the trunk front liner. Refer to 'Body and Frame, Doors, Hood and Trunk, Trunk/Liftgate.' See: Body and Frame/Doors, Hood and
Trunk/Trunk / Liftgate/Service and Repair
4. Disconnect the harness connections to the sensor.
5. Using special tool 18G 1001, remove the sensor retaining ring.