XJR (X308) V8-4.0L SC (AJ26) (1998)
Steering Rack Components
The steering rack assembly:
-
Is mounted on the rear face of the front suspension crossbeam by two forged mounting brackets with resilient bushes. The bushes are handed
(pinion side and non-pinion side) and are orientated according to the vehicle range application.
-
Converts the rotary motion of the steering wheel, via the steering gear pinion, to the lateral motion of the rack.
-
Features a variable ratio steering rack with integral hydraulic power steering cylinder and piston.
-
Has a hydraulic control valve with Servotronic control and positive center feel torsion bar.
The basic steering rack assembly is not serviceable. The following components are serviceable items:
-
Transfer pipework.
-
Servotronic valve.
-
Centralizing cap.
-
Outer ball joint.
-
Rack gaiter.
-
Clips and fittings.
Variable Ratio Steering Rack