XJR (X308) V8-4.0L SC (AJ26) (1998)
10. Raise jack to locate subframe bushes on the body tapered locations.
11. CAUTION: When installing subframe bracket ensure that wheel speed sensor harness is clear.
Fit suspension subframe mounting-brackets.
Position bracket to subframe.
Install but do not tighten bush center bolt.
Install but do not tighten bolts securing bracket to body.
Following same procedure, install mounting bracket on opposite side.
12. Tighten mounting bracket to body bolts to 80-100 Nm.
Following same procedure, tighten mounting bracket bolts on opposite side.