XJR (X308) V8-4.0L SC (AJ26) (1998)
8. Install inner bearing in hub carrier. Install bearing spacer to hub. Install a 3.47 mm (maximum thickness) shim on hub. Install inner bearing in hub
carrier.
9. CAUTION: Do not allow press load to be directed on to hub studs.
Using a hydraulic press, install ABS-sensor rotor to hub.
Place block of wood on press-bed.
Position hub carrier on block of wood.
Position ABS-rotor sensor to hub.
Align assembly to press-ram, and operate press to install ABS-sensor rotor to hub.