XJR (X308) V8-4.0L SC (AJ26) (1998)
5. Withdraw parking brake cable through equalizer (LH side cable only).
6. Lower four-post lift.
7. Raise rear of vehicle to working height and support on stands. Refer to Vehicle Lifting.
8. Remove rear wheel.
9. Position special tool (204-195) on hub studs and install securing nuts.
10. Slacken but do not remove hub to axle shaft securing nut.
11. Remove securing nuts from studs and withdraw special tool (204-195) from hub.
12. Remove rear brake disc.