XJR (X308) V8-4.0L SC (AJ26) (1998)
Transmission Temperature Sensor/Switch: Service and Repair
Removal
1. Disconnect the battery ground lead
2. Raise the vehicle on a suitable lift
-
Carefully remove the drain plug and drain the transmission fluid
WARNING: TRANSMISSION FLUID MAY CAUSE SEVERE BURNS, ENSURE THAT ALL SAFETY PROCEDURES ARE OBSERVED
3. Remove fluid pan fixings (22)
-
Remove the fluid pan & all traces of gasket material
4. Release the fixing (1) INPUT speed sensor securing bracket & pull the sensor clear
NOTE: M5 fixing
-
Disconnect harness multiplug