XJR (X308) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-1352003.png)
3. Secure cover left hand panel to frame using 17 hog rings.
4. Position squab for access and pull cover over squab pad.
5. Ensuring that top of cover is evenly tensioned, fit and fully seat retaining strip on frame.
6. Using 44 hog rings, secure cover to outer edges of frame.
7. Position cover inside armrest aperture and secure on the eight armrest aperture tangs.
8. CAUTION: The apertures in the foam are over-size and must not be used for guidance when cutting seat belt escutcheon apertures in
cover.
Using a suitable knife, carefully cut around headrest support box and seat belt apertures.
