XJR (X308) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-349009.png)
6. Tighten the intake camshaft sprocket securing bolt.
Whilst still applying the opposing force to the sprocket and chain (using 303-532), check that the wedges are still in place, tighten the securing bolt
to 115 - 125 Nm.
Remove the chain tensioning tool and the wedge(s).
7. Remove the camshaft locking tool 303-530 and transfer it to Bank 1 camshafts, aligning the shafts slightly as necessary.
8. Install the chain tensioning tool 303-532 to the exhaust camshaft sprocket, Bank 1.
Reposition the sprockets to the most advantageous position for use of the tool.
Remove the tool.
