XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-2077006.png)
32. Position tack strip clear of BIW and drill out pop rivets securing tack strip to cover.
33. Release cover from tack strip and Withdraw side tension cables through cover piping.
34. Remove cover from vehicle.
35. Remove sealing strip from rear window frame and clean off any residual sealant.
36. Noting positions for installation, clean residual adhesive from frame.
37. Using white spirit, ensure that frame is grease free and dry
Installation
1. Apply new sealant strip to rear window frame.
2. Place cover on clean work surface, fold in half to determine centre and mark centerline with tape at rear edge.
3. Measure and mark centerline of tack strip.