XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Trunk / Liftgate Weatherstrip: Service and Repair
Removal
1. Remove trunk lid seal.
1
Open trunk lid.
2
Starting at front of trunk aperture, withdraw seal from flange exercising care on reaching bonded joint at rear.
Installation
2. Fit trunk lid seal.
1
Ensure that trunk flange is clean and free from oil or grease.
2
Position seal with bonded joint adjacent to trunk latch.
3
Commencing at bonded joint, fit and fully seat seal onto trunk flange, guiding it between rear trunk trim and rear panel.
4
Check that trunk lid closes correctly.