XK-8 Convertible (X100) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-745001.png)
Coolant Temperature Sensor / Switch HVAC: Description and Operation
Coolant Temperature Signal
This signal is supplied to the A/CCM from the instrument cluster, the input being required to:
-
Provide blower inhibit control , to avoid the system in heating mode delivering cold air when the coolant temperature is below 35 °C unless
DEFROST is selected.
-
To progressively increase the fan speed up to maximum blower speed during warm up control. To assist in the control of the outlet temperature.
-
To avoid possible pump or valve damage caused by ice particles in the coolant.
