XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Removal
1. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
2. Disconnect the battery ground cable. See: Starting and Charging/Battery/Battery Cable/Negative/Service and Repair
Remove the battery cover.
3. Remove the trim pad from the door.
4. Remove the door speaker from the door.
Remove the four bolts which secure the speaker.
5. Disconnect and remove the speaker.
Support the speaker, disconnect the multi-plug and remove the speaker.