XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Front Door Panel: Service and Repair
Removal
1. Remove door escutcheon.
1
Holding door handle in the open position, remove the escutcheon securing screw cover.
2
Slacken and remove the escutcheon securing screw, remove escutcheon from door casing and return door handle to closed position.
2. Remove rubber trim mat from rear of door pocket and slacken and remove the securing screw.
3. Remove door casing for access to multiplugs.
1
Release eight studs securing the casing to the door.
2
Position the casing for access and disconnect the door switch pack and puddle lamp multiplugs.
4. Remove door casing from vehicle.
5. Remove puddle lamp lens.
1
Move puddle lamp lens securing tab downwards.