XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1996005.png)
10. Ensure bush is fully seated in subframe.
The clearance between the bush flange and subframe must not exceed 1.5 mm.
11. Ensure bush is aligned correctly in subframe as detailed in Step 8 or 9 as appropriate.
12. Wipe off excess adhesive from subframe and bush, and remove masking tape.
13. NOTE: Allow adhesive at least 30 minutes to cure, before installing subframe on vehicle.
Install suspension subframe on vehicle.