XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1997004.png)
6. Fit suspension subframe mounting-brackets.
Position bracket to subframe.
Fit bush center bolt, DO NOT tighten bolt at this stage.
Fit bolts securing bracket to body, DO NOT tighten bolts at this stage.
Repeat procedure on opposite-side mounting bracket.
7. Tighten bolts securing mounting brackets to body.
Repeat procedure on opposite-side mounting bracket.
8. Tighten mounting bracket, bush center bolts.
Repeat procedure on opposite-side mounting bracket.
9. Remove jack from beneath axle assembly.