XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Power Door Lock Actuator: Service and Repair
Removal
1. Turn ignition key to position II.
2. Motor door glass to fully raised position.
3. Turn ignition key to position 0.
4. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
WARNING: BEFORE COMMENCING WORK WITHIN A DOOR INTERIOR, THE GROUND CABLE MUST BE
DISCONNECTED FROM THE BATTERY TERMINAL TO PREVENT INADVERTENT ACTIVATION OF THE GLOBAL GLASS
CLOSING FEATURE.
5. Remove door escutcheon.
1. Holding door handle in the open position, remove the escutcheon screw cover.
2. Remove the escutcheon screw, remove escutcheon from door casing and return door handle to closed position.
6. Remove trim mat from rear of door pocket and remove the screw.