XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
![background image](/jaguar/xk-8_coupe_(x100)/v8-4.0l_(aj26)/Page-2068001.png)
Power Seat Switch: Service and Repair
Removal
1. Power seat to fully raised position.
2. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
3. Remove front seat from vehicle and place on clean work surface. See: Service and Repair
4. Release seat harness multiplugs from mounting bracket and disconnect multiplugs.
5. Sever and discard tiestraps securing seat harness to seat frame.