XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1520003.png)
2. Install brake pads to caliper housing.
Remove paper backing from pads to reveal adhesive shim. Install brake pads, insert clip located on back of inner pad into caliper piston.
3. Install caliper housing to caliper carrier.
Align housing to carrier.
Install and tighten guide pins to 25 - 30 Nm.
Install dust covers.
Install anti-rattle spring.
4. Repeat procedure to install opposite side brake pads.
5. Fit wheels.
6. Remove stands and lower vehicle.
CAUTION: Remove brake fluid spillage immediately from paint work, with clean water.
