XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
6. Depress and hold down brake pedal at the specified measurement using the special tool.
-
Position tool between brake pedal and seat frame.
-
Turn the tool wheel until the brake pedal is held 60mm down from its released position.
7. Close bleed nipples on both calipers.
-
Remove bleed tubes and containers.
-
Tighten front bleed nipple to 4 - 6 Nm.
-
Tighten rear bleed nipple to 8 - 11 Nm.
CAUTION: A new brake hose must be installed when replacing a front brake caliper.
8. Disconnect brake hose from brake tube.
-
Unscrew brake tube union nut.
-
Remove nut from hose.
-
Remove hose from bracket.