XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
6. Depress and hold down brake pedal at the specified measurement using the special tool.
-
Position tool between brake pedal and seat frame.
-
Turn the tool wheel until the brake pedal is held 60 mm down from its released position.
7. Close bleed nipples on both calipers.
-
Tighten bleed nipples to 12 - 16 Nm.
-
Remove bleed tubes and containers.
8. Release brake hose from caliper.
-
Remove union bolt.
-
Remove and discard sealing washers.
-
Install plugs into caliper and hose.