XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1545010.png)
4. Install brake hose to caliper.
-
Remove plugs from caliper and hose. Install new sealing washers.
-
Align hose as shown above.
-
Install and tighten union bolt to 22 - 26 Nm.
5. Remove special tool from brake pedal.
6. Fit wheels.
NOTE: Make sure the brake hose is routed correctly.
7. Remove stands and lower vehicle.
8. Bleed brake hydraulic system.
