XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
![background image](/jaguar/xk-8_coupe_(x100)/v8-4.0l_(aj26)/Page-1569001.png)
Parking Brake Tensioner: Service and Repair
Removal
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict
the number of times a nut or bolt can be used.
1. Position vehicle on a four-post lift.
2. Make sure parking brake is fully released.
3. Remove equalizer from rear parking-brake cable.
-
Remove adjustment nut.
-
Remove equalizer from adjustment rod and cable.
-
Remove damper.
4. Remove adjuster assembly from relay.
-
Remove clip and clevis pin.
-
Remove adjustment rod.
-
Remove fork-end from adjustment rod.
Installation
1. Installation is the reverse of the removal procedure.
2. Adjust parking-brake cable.