XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-421003.png)
12. CAUTION: Use a length of steel strip that will not fall into the timing cover.
Protect the upper face of the timing cover from scratches, when removing the bolt which secures the sprocket.
Place a flat piece of steel strip along the timing cover horizontal jointing face, adjacent to the exhaust camshaft sprocket.
Secure the steel strip in mace with adhesive tone
13. A ball-ended hexagon drive bit is required to remove the sprocket securing bolt. A suitable tool is available from Snap On as (FABLM10E) Long
Series 10mm AF.
14. Remove the bolt which secures the sprocket to the exhaust camshaft.
