XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-502003.png)
12. Disconnect the air cleaner cover.
Remove the five Clips which secure the air cleaner cover.
13. Remove the intake tube/air flow meter/air cleaner cover assembly.
Remove the intake tube/air flow meter/air cleaner cover assembly.
Remove and discard the rubber seal; air intake tube to throttle body.
14. Disconnect the multi-plugs from the throttle body.
Disconnect the throttle body motor multi-plug.
Disconnect the two potentiometer multi-plugs, one each side of the throttle.
Disconnect the vacuum pipe elbow from the throttle actuator.