XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-502006.png)
21. Release the induction elbow support; working from the right hand side.
Disconnect the vacuum pipe from the center of the induction elbow.
Remove the upper bolt from the induction elbow support bracket.
22. Release the induction elbow support; working from the left hand side.
Disconnect the vacuum pipe from the front of the induction elbow.
Disconnect the engine breather T-piece from the induction elbow.
Remove the upper bolt from the induction elbow support bracket.
Loosen, but do not remove, the lower two bolts at the induction elbow support bracket.
23. Disconnect the electrical connector from each fuel injector.
