XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
32. Note the orientation of the sprocket relative to the sprocket for the Bank 2 drive (half a tooth out of line) and remove the sprocket.
33. Clean and inspect all relevant components.
Installation
1. Install the sprockets to the crankshaft.
The teeth of Bank 1 and Bank 2 sprockets on the crankshaft must be out of phase with each other. If they are in-phase after installing, remove the
Bank 1 sprocket, turn it on its vertical axis and install it.
2. Install the chain tensioning tool 303-532 to the exhaust camshaft sprocket, Bank 2.
Reposition the sprocket (and the VVT unit) for the most advantageous position for use of the tool.
Remove the tool.