XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-560002.png)
5. Pull the VVT assembly clear and discard the O-ring.
Installation
1. Fitting a new VVT solenoid assembly is the reverse of the removal procedure. Fit a new O-ring, lubricated with petroleum jelly.
2. Fit and tighten the two bolts to 10-14 Nm.
3. Remove the paintwork protection sheets and close the cover.
4. Connect the battery and fit the battery cover.
Reset the radio and the clock.